12 Pin Connector 16 pin connector Holden/Commodore Connector ALDL to Bluetooth Available in 12 USA,16 USA or AUS, or 6 pin Holden/Commodore AUS versions Connect to your OBD1 GM vehicle wirelessly 12 Pin ALDL - GM 82-93 & some 94-95 Supports both 160 Baud Pin E and 8192 Pin M protocols. Used mainly in US GM vehicles. 16 Pin ALDL - GM Some 94-95 sometimes known as OBD1.5. Used both in the USA and AUS GM vehicles. 6 Pin Holden/Commodore - Used only in Australian GM vehicles. NOTE - Your diagnostic software must be able to receive the data stream as 9600 baud.

Instructions are included on how to implement this with TunerPro/TunerPro RT NOTE - A laptop with bluetooth compatibility is needed to receive the signal. 12 Pin ALDL - The module will power from most cars using the ALDL Pin G. For cars without a pin G power source a separate power plug is provided. The module can also be powered via USB power.

16 Pin ALDL - The module will require switched power on Pin 16 6 Pin Holden - The module runs off of the Fuel Pump Power test line on Pin G This module is compatible with programs such as TunerPro and TunerPro RT. Use it with your Android device - Works with ALDLdroid! Microsoft office 2007 enterprise ita 32bit preattivato. ALDLdroid sold separately - Check compatibility with your android device before purchasing.

Another small update to this. I found some settings in device manager for the drivers for this USB converter. Under advanced there is a setting for latency. By default it was set at 16. I changed it to 1 and was able to completly remove the wait for silence pause in my monitor macro. Sampling frequency now bounces between 9.5 and 11.8.

Your Location Connector.